Makita DHP481Z 18v LXT Brushless Combi Drill Body Only

What's in the box. Makita DHP481Z 18v LXT Brushless Combi Drill Body Only. The Makita DHP481 LXT combi drill is powered by an 18v lithium-ion battery and the brushless motor enables up to twice the run-time of traditional motors. This two-speed drill will run up to 2,100rpm in high gear and 550rpm in low. It will deliver 31,500 impacts per minute in high gear and 8,250 impacts per minute in low gear. The 13mm single sleeve keyless chuck enables 16mm capacity in masonry, 13mm in steel and a massive 76mm in timber. Torque can be adjusted to 21 alternative settings and has a dedicated drilling mode. The DHP481 will generate 60Nm of fastening torque (soft joint) and between 115-125Nm (hard joint), the highest torque yet from the Makita 18v range. There are twin LED job lights with afterglow once the variable speed trigger is released and a new side handle configuration gives light tool control. Coupled with the soft grip ergonomic handle design positive drill-driver capability is assured. It weighs just 2.7kg, and is more compact (20mm shorter) than the previous BHP458 model.

Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge. Single sleeve keyless chuck allows for easy bit installation/removal by one hand. Twin LED job light with afterglow.

Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity. Variable speed control by trigger. Best possible ergonomic handle for drill-driver applications.

Compact overall length of 205mm. XPT - Extreme Protection Technology.

Soft Application Max Torque (Nm): 60. Hard Application Max Torque (Nm): 115-125. Torque Settings: 21 + Drill.

LED Job Light: Yes / Twin / After-glow. Battery Compatibility: 18v Lithium-Ion (LXT). Variable Speed Control Trigger: Yes. No Load Speed (RPM) High: 0-2100. No Load Speed (RPM) Med: N/A. No Load Speed (RPM) Low: 0-550. Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal. Screw Capacity: Machine Screw (mm): 6. Screw Capacity: Wood Screw (mm): 10 x 90. Drill Capacity: Concrete (mm): 16.

Drill Capacity: Metal (mm): 13. Drill Capacity: Wood (mm): 76.

Impact Rate (BPM) High: 0-31500. Impact Rate (BPM) Med: N/A. Impact Rate (BPM) Low: 0-8250. Kg with 1.5/2Ah Batt: 2.5.

Kg with 3/4/5Ah Batt: 2.7. Sound Pressure Level (LpA): 85 dB (A). Sound Power Level (LWA): 96 dB (A). Sound Uncertainty (K): 3 dB (A).

Drilling Concrete Vibration Emission (ah): 6.5 m/s². Drilling Concrete Vibration Uncertainty (K): 1.5 m/s².

Drilling Metal Vibration Emission (ah): 2.5 m/s². Drilling Metal Vibration Uncertainty (K): 1.5 m/s².

Please note that although images are usually accurate, please refer to the contents list for what is actually included. Items are brand new and unused unless otherwise stated. On rare occasion, items with broken seal or extra stickers will do so only due to inspection or contents checking - these are still considered brand new and unused. The item "Makita DHP481Z 18v LXT Brushless Combi Drill Body Only" is in sale since Thursday, December 13, 2018.

This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Cordless Drills". The seller is "powertoolworlduk" and is located in Newton Aycliffe. This item can be shipped to United Kingdom.

Brand: Makita
Type: Rotary Hammer Drill
Battery Included: No
Voltage: 18v